測速測長

InteliSENS? SLR-MID 系列

InteliSENS??SLR-MID 系列 - 前面
InteliSENS??SLR-MID 系列 - 背面
InteliSENS??SLR-MID 系列 - 接口
InteliSENS??SLR 系列 - 帶可選的AiG2顯示器

產品特點

 

  • Non-contact, high-speed, solid-state laser speed and length measurement with no slippage, drift or mechanical wear and greatly reduced maintenance compared with contact wheel / roller systems.
  • Bidirectional speed and length measurement; accurately measures speed and length during line stoppage, reversal and creepage.
  • EU MID Class 1 accuracy compliant (0.125%).
  • EU MID compliant 90-day data logging capability.
  • Fitted with PROFIBUS industrial communications bus as standard.
  • AiG2-MID interface display unit included as standard.
  • Optional external printer available for batch length ticket printing.

其他信息:

Pre-sales enquiry?click here >

Manual request?click here >

Support?request?click here >

InteliSENS? SLR-MID 系列

Introduction

Proton Products InteliSENS? SLR-MID Series non-contact, bidirectional speed and length gauges provide extremely accurate speed and length measurements in almost any production environment and are MID-certified (certificate number: UK/0126/0120) for final shipping length measurement for products destined for EU-markets (EU Directive 2004/22/EC).

Automatic direction detection and measurement down to zero speed means that the InteliSENS? SLR gauge length measurement counts both up and down, so final length measurements will still be accurate to 0.05% even with production lines that exhibit stoppage, direction reversal and creepage.

Production processes for wire, cable, web products, woven and non-woven materials, paper, plastic film, tapes, building materials, floorings and labelling can all be measured using the laser Doppler method.

Applications requiring a precise cut-to-length process benefit from the non-slip and highly accurate laser measurement technique which reduces scrap, increases uptime and improves material yield by eliminating product “Give Away” or “Short Length” claims.

InteliSENS? SLR-MID Series gauges are money-saving, direct replacements for traditional problematic and high-maintenance contact wheel and roller-type devices and are extremely easy to install and operate. Integration with production line controllers such as PLCs is eased by the availability of a wide variety of industry standard communications interfaces.

The InteliSENS? SLR-MID Series is fully-certified to Class 1 accuracy (0.125%) for final shipping length measurement on bidirectional lines for products destined for EU-markets (EU Directive 2004/22/EC).

Operating principle – Heterodyne laser surface velocimeter

Proton Products InteliSENS? series speed and length gauges illuminate the measured surface with a precisely pitched interference pattern created by the intersection of two laser beams. The alternating bright and dark interference fringes modulate the light scattered by the object with a frequency proportional to the object speed. This scattered light is detected by a photodiode and the electrical signal digitally processed to determine the frequency and hence the speed. Object length is then calculated by integrating the speed measurement over time.

The InteliSENS? SLR-MID Series bidirectional speed and length gauges extend this principle by using a high-frequency Bragg cell modulator to illuminate the measured surface with a scanning interference pattern, which generates an oscillating light signal even when the object is stationary. Direction of motion is determined by whether the scattered light frequency is higher or lower than the stationary frequency.

SL-Operating-Principle

規格

型號
SLR3060-MID
單位
測量距離300mm
景深60mm
******速度(雙方向)5000m/min
Minimum single length measurement0.4m
Scale interval0.1mm
Accuracy class1-

共同規格

規格
******
典型
******
單位
精度0.125%
加速500m/s2
測量獲取時間40µs
激光斑大小3mm
運行溫度545°C
防護等級IP67-
重量3kg
長度230mm
寬度130mm
高度75mm
電源輸入電壓152425VDC
功率20W
測量單位速度米/分鐘 (metres/minute)
長度米 (metres)
激光安全控制輸入激光外置閉合觸點使激光器運行
快門外置閉合觸點使快門開啟
2×邏輯輸入電氣規格******輸入電壓: +24Vdc
功能方向長度復位End of reel (trigger printout)
3×繼電器輸出電氣規格隔離繼電器觸點
******電壓: 50Vdc******電流: 0.5A
功能Gauge Fault預設長度 1預設長度 2
2×脈沖輸出電氣規格光隔離差分輸出
輸出電壓: 5V 或用戶提供 (低于 24V)
******頻率: 250kHz
功能正交 (1000 pulses/m)索引 (1 pulse/m)
CANbus 通訊Connects to a Proton Products AiG2-MID interface display unit
串行通訊RS-232 打印機端口
Industrial bus communicationsPROFIBUS
OptionsExternal printer for batch length ticket printing.
山西泳坛夺金玩法