測速測長

InteliSENS? SLR mini 系列

InteliSENS??SLR mini 系列
InteliSENS??SLR mini 系列 - 顯示屏幕
InteliSENS??SLR mini 系列 - 接口
InteliSENS??SLR mini 系列 - 與手機比較尺寸

產品特點

 

  • 與接觸輪/滾輪體系相比,用非接觸式高速、固態激光器測量速度和長度具有無滑移、無漂移、無機械磨損和免維護等優點。
  • 雙向測速、測長; accurately measures speed and length during line stoppage, reversal and creepage.
  • UKAS可溯源校準;精度優于0.05%,且可重復性優于0.02%。
  • 堅固的工業設計,適用于惡劣的工況環境。
  • 可與配有工業標準的通信接口相匹配,可很容易地將PLC與生產線設備整合為一體。
  • 持有成本極低。

其他信息:

系列小冊
下載 PDF >

尺寸圖
下載 PDF >

售前咨詢 點擊 >

售前咨詢 點擊 >

售前咨詢?點擊 >

InteliSENS? SLR mini 系列

介紹

Proton Products InteliSENS? SLR 系列非接觸式單向測速測長儀幾乎在任何生產環境中都能提供高精度的長度和速度測量。

Automatic direction detection and measurement down to zero speed means that the InteliSENS? SLR gauge length measurement counts both up and down, so final length measurements will still be accurate to 0.05% even with production lines that exhibit stoppage, direction reversal and creepage.

采用激光多普勒方法,線纜、網狀產品、編織或無紡材料、紙張、塑料薄膜、帶狀材料、建筑材料、地板材料和標簽材料等的所有生產流程都得以******測量。

由于要求應用得益于無滑動高精度激光測量技術的******切割長度工藝,從而降低了廢品、增加了正常運行時間、提高了材料利用率、消除了產品“白送”的浪費或長度“缺斤少兩”的索賠。

InteliSENS? SLR系列測速測長儀極其省錢,它可直接取代高故障率和高維修率的傳統式接觸式輪式和滾筒式設備,且安裝和操作起來非常方便。可用各種工業標準的通信接口方便地將諸如PLC這類生產線控制器與之整合為一體。

工作原理——激光表面測速儀

Proton Products InteliSENS? SLR系列測速測長儀用兩束激光交匯處所產生的干涉條紋對測量面進行照射。明暗交替的光干涉條紋對物體散射光進行調制,其頻率與物體速度呈正比。此散射光由一光電二極管檢測出,電信號必須經過數字化處理方可確定頻率因而也是速度。然后整合一段時間中的測量值,從中計算出物體的長度。

The InteliSENS? SLR series bidirectional speed and length gauges extend this principle by using a high-frequency Bragg cell modulator to illuminate the measured surface with a scanning interference pattern, which generates an oscillating light signal even when the object is stationary. Direction of motion is determined by whether the scattered light frequency is higher or lower than the stationary frequency.

SL-Operating-Principle

規格

型號
SLR mini 1220
SLR mini 3060
單位
Part number00050MC01100050MC012-
測量距離120300mm
4.7211.8inch
景深2060mm
0.792.36inch
******速度(雙向)20005000m/min
656016400ft/min

共同規格

Specification
Minimum
Typical
Maximum
Units
Accuracy*0.05%
Repeatability0.02%
Acceleration500m/s2
Internal measurement rate200kHz
Measurement output interval20µs
Laser spot diameter4mm
Operating temperature545°C
41113°F
Ingress protectionIP67
Weight1.1kg
2.4lb
Length142mm
5.59inch
Width104mm
4.09inch
Height52mm
2.05inch
Power supply152425VDC
Power consumption8W
*only valid if the measured object is positioned within the central 20% of the depth-of-field.

 

Measurement units
(end-user configurable)
Speed
metres/minute
feet/minute
Lengthmetresfeetyards
Laser safety control inputsLaserExternal closed contact to ground enables laser diode.
ShutterExternal closed contact to ground opens laser shutter.
Shutter status outputElectricalN-channel MOSFET pull-down (for connection to user-supplied opto-isolated relay).
Maximum voltage: 30VDCMaximum current: 100mA
FunctionPulled to ground when laser shutter is open.
3×Logic inputs
(end-user configurable)
ElectricalMaximum input voltage: 24VDC
FunctionLength resetDisplay holdLength hold
Speed holdDirectionPause
2×Logic outputs
(end-user configurable)
ElectricalN-channel MOSFET pull-down (for connection to user-supplied opto-isolated relay).
Maximum voltage: 30VDCMaximum current: 100mA
FunctionGauge OKLaser at tempLaser on
MeasuringPreset Length 1Preset Length 2
2×Differential pair pulse outputs
(end-user configurable)
ElectricalOpto-isolated differential pair
Output voltage: 5V or user supplied (up to 24V)
Maximum frequency: 1MHz
FunctionIndependentQuadrature pair
CANbus communicationsConnects to an optional Proton Products CDi interface display unit
Serial communicationsRS-232
Ethernet communicationsModbus protocol
Optional communications (factory-installed, choice of one, replaces standard Ethernet interface)PROFIBUSEthernet/IPDeviceNET

配件

Click here for information on accessories for the InteliSENS? SLR Series of laser speed and length gauges.

山西泳坛夺金玩法